You want to support this project ? https://www.paypal.me/leboisVR?locale.x=en

Summary :

1. Presentation
2. Features
3. Shopping list
4. Assembly instructions

For info: I do not sell ANY PEDALS OR PRINTED PARTS. That would be trading, and I am not, and do not wish to be a trader. No need to ask. However, I am looking for a company that could produce plastic parts for those who do not own 3D printers. If you know of any…

1) PRESENTATION

The SRT GT accelerator pedal is a simple and compact pedal. Designed to be economical, it offers all the necessary settings to achieve the perfect driving position.

2) FEATURES

Angle can vary from -20° to 35° The starting position is tuned by a screw and a knob (no tool needed).
The end position is tuned by steps.

It measures 195mm from the axle to the top. You can add 55mm with this extension.

There is a preload for the metal torsion spring.
Pictures of v5.8 (thingiverse link):

3) SHOPPING LIST

ELECTRONICS :

1. 1 potentiometer 10k (axle diameter 6mm, axle length 10mm)
2. Cables 3cores 22awg (outer diameter is 4mm).

MECANICS :

1. 1 torsion spring
2. 0.3 kg PLA (Amazon)
3. 2 bearings KP001 12mm (Amazon, Aliexpress, Ebay) (Each SRT pedal requires two 12mm KP001)

Screws:

– 2 x M4x20mm Flat Head Countersunk and 2x m4 nuts (for the pedal plates, you can use 1 or 2 screws per plate… One is enough, but you can use two to be sure). This Amazon kit contains the two screws and many others that will be useful for other projects.

– 1 x M12x100 metal axle (Amazon, Aliexpress, Ebay)

4) ASSEMBLY INSTRUCTIONS

To be added soon.

The post SRT Accelerator pedal GT appeared first on Lebois Racing.