The plastics

There are countless brands of plastics … that offer countless plastics … Here I give you the fruit of my experience.

What is PLA?

PLA plastic or Polylactic acid (Polylactic acid) is a plastic of vegetable origin, bio-degradable. It is the most commonly used material in 3D printing because it is inexpensive and easy to use.

Attention, yes it is bio-degradable, but only in industrial composting, i.e. under high heat. In practice, I haven’t yet found a solution to recycle it. I’m waiting for the end of the confinement to go and ask at the waste collection centre in my town to see if they’ll take it back.

On the other hand, you have to be aware that the plastic you use is composed of PLA…and many additives.

Finally, it is theoretically possible to crush the scraps and rejects and melt them into a new filament. Unfortunately, there are only a few companies carrying out this operation because :

  • risk of damaging the recycler if a metal part is among the PLA scraps
  • economically unattractive: 1kg of PLA on Amazon costs around 20€. The return trip of 1kg by colissimo costs around 16€ .

Where to buy PLA?

If you are in a hurry, the ideal is obviously Amazon. There is the Amazon Basic, it is neither the cheapest nor the best, but at least it is always available. Then you can always find cheaper filaments, up to 18€ per kilo.

If you have time, two possibilities: Aliexpress or Sunlu. You can find cheaper PLA there, especially if you buy by lot. For example here, 5kg for 60€ delivered, that is 12€/kg.

On the Sunlu website, there are regularly interesting promotions, especially for batch purchases (take advantage of -10% with the code UEPKDZRAJT). Currently, Sunlu is one of the two leaders when it comes to PLA and also 3D printers. Their silk PLA is also beautiful in rendering.For these last two solutions, we find deliveries from Europe that rarely exceed ten days.


PLA or ABS ?

ABS has many advantages in terms of strength and temperature resistance. However, it is more difficult to print because it requires higher temperatures. It is derived from petroleum, and gives off harmful vapours during printing. For all these reasons, I have never tried it, PLA being sufficient in all cases.

Which PLA ?

And this is what interests us most: which PLA to buy. Personally, I always buy from Amazon, especially because they deliver quickly.

For a long time I ordered the cheapest PLAs I could find for two reasons:

  • It’s the cheapest
  • If a low-end PLA allows me to carry out my projects, it’s the assurance that everyone will be able to do the same with any plastic.

Indeed, if I make a pedal, but it only holds up if I use a top-of-the-range PLA, which is hard to find and expensive, it doesn’t make my projects accessible.

Various specialised sites also offer PLA at very interesting prices, sometimes cheaper than Amazon.

Before buying in quantity, or buying several colours at once, be aware that :

  • PLA dries over time and becomes brittle. A spool that has been out of its packaging for 3 months will become brittle: in particular, the thread will break at the extruder if the bend is too steep.
  • PLA switches are always a risk of machine malfunction.

1kg, 2kg, 3kg?

The quantity of plastic is an important factor when purchasing. Unless you want to make a specific print with a specific colour, 0.5kg rolls should be avoided.

Indeed, the smaller the spool, the quicker you will ask yourself the question: is there enough PLA left to start a print? You will then have to monitor the printing more frequently, which may be possible during the day, but impossible at night… unless you wake up in the middle of the night…

So ideally, you will prefer spools of one kilo…or even more? Maybe not, as indicated above, PLA dries so you shouldn’t buy 3kg of PLA all at once, and then let 2kg dry…

The PLA+

PLA+ is a PLA…better! There is no specific standard that controls the appellation, and I have only tried two references, to which I have been faithful ever since. See for yourself the print quality (0.2 resolution):

Some might argue that the print quality of this plastic is a consequence of the printer setting, and that the same quality can be obtained with a cheaper PLA by perfectly adjusting your printer. Perhaps. It’s just my experience.


I also use this PLA+ in 1kg (Amazon, Aliexpress), great print quality :


I've been passionate about cars since I was a kid! I learned the multiple variations of the Skyline R34 through the Gran Tursimo series, until I discovered GTR2 at the wheel of a keyboard. A few years later, I plunged back into Sim Racing with a G27 which made me enter the DIY world. Always looking for an immersion out of reach in reality, I develop projects that I take care to make accessible to any 3D printer owner!
Posts created 77

One thought on “The plastics

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top

Please disable your adblocker or get a Patreon subscription to access the ad free website !