Of intermediate size (116mm), it is sufficient to transmit engine and suspension vibrations on large chassis. A 50W amplifier per channel is enough to power it.

About 60€ on Amazon Uk.

Mounting tips

To get the most out of this model, the following tips should be followed:

• Use M5 screws for mounting
• Use two keys of 10 to install the audio cables: one key holds the terminal block, the other serves as the screw. In fact, the entire terminal block is only held in place by a rivet, which may eventually fail due to repeated incorrect installation.
  
• An audio cable gauge 16 is perfectly dimensioned for this type of bass shaker.
• Use RV1.25-5S crimp lugs: bass shakers generate a lot of vibration (that’s their job), but these vibrations tend to loosen everything. So don’t try to insert a bare cable: either you tighten too much, and then you crush the cable that will come out. Or you don’t tighten enough and the screw will loosen. The ultimate solution: the RV1.25-5S terminal (Amazon, Aliexpress).

The post Sinus Live bass shaker appeared first on Lebois Racing.