The control box contains all the electronic for the GT seat belt tensioner, and allows to make it automatic. Want to support this project ? https://www.paypal.me/leboisVR?locale.x=en
Logitech G25, G27, G29 pedals
Thought Logitech pedals were outdated? Think again, there are many ways to turn them into state-of-the-art pedals!
SRT100 actuators
The SRT100 actuators are based on stepper motors. Accurate and powerfull, they allow to build a 2DOF (2 actuators, pitch/roll) or 3DOF sim motion rig (3 or 4 actuators, pitch/roll/heave) for approximately 300€/actuator.
SRT100 actuators : Wiring
The wiring is quite simple. Each driver is controlled by two wires : pulse and direction. Once the driver received a “pulse” signal, the motor will moves a step. If you have three actuators instead of four, you just have…
Handbrake hydraulic P1
The SRT P1 hydraulic handbrake is based on the same principle as the hydraulic brake pedals: a brake caliper is actuated by a hydraulic circuit in which the pressure is measured. It is directly compatible with the SRT gearbox. You…
SRT GEARBOX DEV #2
v7.9 finished and functional! Opening of beta registrations! Want to support this project ? https://www.paypal.me/leboisVR?locale.x=en
OpenSFX actuators
OpenSFX100 actuators operate very similarly to SRT100 actuators. The difference lies mainly in the use of servo motors instead of stepper motors, which are both cheaper and less powerful.
Brake pedal SRT P1 v5.3 REV2
The SRT P1 v5.3 brake pedal evolves to REV2. The goal is to correct the hydraulic circuit, optimise the lever and prepare the transition to higher versions.
Accessories
Here you will find all the accessories to customize your SRT pedals. 1) The pedals 3D printed Plates can be printed directly in 3D. The contact at the foot is obviously different from that with a metal plate. However, there…
Seat Belt Tensioner GT V3.0
The SRT seat belt tensioner GT allows for a limited budget to make the negative Gs (braking, ABS, shifting) credibly felt. It works with Simhub.