The P1 belt tensioner allows you to feel positive and/or negative Gs in sim racing. It works with FlyPT. It’s a DIY project ! The V2 offers torque gains thanks to a smaller diameter spool. The housing is now total…
Traction loss rig with SRT80 actuators
This article is WIP. Information subject to change without notice. Traction Loss lets you feel the sensation of the rear end of the car drifting. On the chassis side, the shopping list includes two frames: Lower frame: the one that…
Seat Belt tensioner P1 : Smart Control Box
To view this content, you must be a member of Lebois’s Patreon at $5 or more Unlock with PatreonAlready a qualifying Patreon member? Refresh to access this content.
Upgrade kit for OpenSFX Actuators
The OpenSFX actuator upgrade kit allows you to modify the travel of the OpenSFX actuators while keeping the motors and profiles. The travel is increased from 130mm to 215mm. The kit also makes the actuators Push Pull compatible, the 30mm…
SRT80 actuators
The SRT80 are actuators based on 80ST servo motors, 80×80 aluminum profiles, and a special ballscrew that allows a travel of 220mm (compared to about 130mm for the OpenSFX). For each step, there is a dedicated channel on the Discord…
Sim Racing SRT P1 Seat Belt Tensioner
The P1 belt tensioner allows you to feel positive and/or negative Gs in sim racing. It works with FlyPT. It’s a DIY project !
3D explained in 3 minutes !
What means 3D printing ? 3D printing consists of using a printer to create 3D objects.
Ferrari 488 GT3 steering wheel for Simucube
The Ferrari 488 GT3 steering wheel by Lebois Racing is one of the closest reproductions to the real thing! Compatible with Simucube 1 and 2 wireless. The 3D files are available in 2 versions: a large plate version (>22cm x…
SRT Paddle Shifter V2
SRT shifters are the first magnetic shifters with ball bearings in the world. Presentation !
USB Sound card 7.1 for bass shakers
Presentation An inexpensive USB sound card easy to integrate that can handle up to 8 bass shakers ! Available on Aliexpress from 25€. Using the sound outputs of your motherboard is great, but it can mean pulling a lot of…