The SRT100 actuators are based on stepper motors. Accurate and powerfull, they allow to build a 2DOF (2 actuators, pitch/roll) or 3DOF sim motion rig (3 or 4 actuators, pitch/roll/heave) for approximately 300€/actuator.
SRT100 actuators : Wiring
The wiring is quite simple. Each driver is controlled by two wires : pulse and direction. Once the driver received a “pulse” signal, the motor will moves a step. If you have three actuators instead of four, you just have…
The 3D printers
The printer market is booming. On the one hand, more and more materials can be used (from titanium to food), on the other hand, the offers available to individuals are more and more numerous and easy to handle. Most SRT…
Handbrake hydraulic P1
The SRT P1 hydraulic handbrake is based on the same principle as the hydraulic brake pedals: a brake caliper is actuated by a hydraulic circuit in which the pressure is measured. It is directly compatible with the SRT gearbox. You…
SRT GEARBOX DEV #2
v7.9 finished and functional! Opening of beta registrations! Want to support this project ? https://www.paypal.me/leboisVR?locale.x=en