The printer market is booming. On the one hand, more and more materials can be used (from titanium to food), on the other hand, the offers available to individuals are more and more numerous and easy to handle. Most SRT…
Handbrake hydraulic P1
The SRT P1 hydraulic handbrake is based on the same principle as the hydraulic brake pedals: a brake caliper is actuated by a hydraulic circuit in which the pressure is measured. It is directly compatible with the SRT gearbox. You…
SRT GEARBOX DEV #2
v7.9 finished and functional! Opening of beta registrations! Want to support this project ? https://www.paypal.me/leboisVR?locale.x=en
OpenSFX actuators
OpenSFX100 actuators operate very similarly to SRT100 actuators. The difference lies mainly in the use of servo motors instead of stepper motors, which are both cheaper and less powerful.
SRT GEARBOX DEV #1
Version 7.8 : mid-term overview ! Want to support this project ? https://www.paypal.me/leboisVR?locale.x=en
Brake pedal SRT P1 v5.3 REV2
The SRT P1 v5.3 brake pedal evolves to REV2. The goal is to correct the hydraulic circuit, optimise the lever and prepare the transition to higher versions.
TUNING TUTORIAL 1 : TIRE PRESSURE
Adjusting the tyre pressures brings the tyres into their optimum temperature range (75°-90°). It also allows you to adjust grip, wear level and top speed. The basis : Under inflated tire Perfectly inflated tire Over inflated + temperature+ grip+ wear+…
Tuning tutorial 1 : Tire pressure
Tyre pressures determine the shape of the tyres. Too low, and the tyre will crush against the ground, increasing the surface area of the tyre in contact with the ground, temperature and wear.
3D printers upgrades
3D printers can be easily upgraded. Many components are standardized and 3D printers can…print their own enhancements. However, it is easy to fall into the trap of wanting to improve everything, and especially to want to print all the improvements,…
Accessories
Here you will find all the accessories to customize your SRT pedals. 1) The pedals 3D printed Plates can be printed directly in 3D. The contact at the foot is obviously different from that with a metal plate. However, there…